Digrain pyrethrum active mosquito diffuser

DESCRIPTION

Pack containing a programmable automatic diffuser + 1 x 250ml plant-extract-based insecticide aerosol.

The DIGRAIN Aerosol for Diffuser and Active Diffuser pack is an automatic insecticide diffuser, designed to effectively treat mosquitoes.

The system is installed very quickly and easily by placing it high up, at least two meters off the ground, on a piece of furniture or mounted directly to the wall, ensuring discretion while providing protection for the room.

The DIGRAIN aerosol for diffuser, based on natural pyrethrum extracts, paralyzes the insects' nervous system so they are knocked down shortly after contact.

Technical specifications:

 The DIGRAIN Aerosol for Diffuser and Active Diffuser pack is a high-performance device that guarantees protection against mosquitoes for 16 weeks, for a room up to 150m2.

 This device allows for usage adapted to the user's needs:

- Choice of diffusion interval (every 7.5, 15, or 30 minutes),

- Selection of diffusion range (24/7, in the presence of light, or in darkness),

- LED indicator confirming that the device is working properly.

INSTRUCTIONS FOR USE

The manual included in the DIGRAIN Aerosol for Diffuser and Active Diffuser pack features a diagram of the diffuser's functions. It operates with two batteries, which are included in the package.

- Open the diffuser casing.

- Check that the device is turned off (switch in the "Off" position).

- Insert the batteries.

- Set the switch to "Test," then set the frequency and operating mode.

- Move the switch back to the "Off" position.

- Install the aerosol refill in its slot, then select the diffusion rate (position 30, for example, for diffusion every 30 minutes).

Then select the desired operating mode, allowing treatment when the premises are unoccupied.

- Move the switch to the "Int" position, then close the casing.

Warning: diffusion begins as soon as the casing is closed.

Keep the device away from your face and eyes.

One spray corresponds to 85L, providing over 1400 hours of operation at a 30-minute interval setting.

Ventilate before re-occupying the area, until the air has been completely renewed.

PRODUCT DETAILS

Technical data sheet

- Open the diffuser casing.

- Check that the device is switched off (switch in the Off position).

- Insert the batteries.

- Set the switch to Test, then adjust the operating frequency and amplitude.

- Set the switch back to the Off position.

- Install the aerosol refill in its slot, then select the diffusion speed (position 30, for example, for diffusion every 30 minutes).

Then select the desired operating mode, allowing for treatment when the premises are unoccupied.

- Set the switch to the Int position and close the casing.

Warning: diffusion begins as soon as the casing is closed.

Keep the device away from the face and eyes.

One spray corresponds to 85L, which means over 1400 hours of operation for diffusion every 30 minutes.

Ventilate before reoccupying the premises, until the air has been completely renewed.